Osmopoly X Oil Finish

Caring for Osmo Polyx-Oil involves regular dry dusting, gentle cleaning with water and Osmo Wash & Care, and occasional refreshing with Osmo Liquid Wax Cleaner, avoiding harsh cleaners like bleach or ammonia; for deep wear, apply a thin maintenance coat of Polyx-Oil after light sanding. Always use damp, not wet, cloths, and wipe dry immediately to prevent water damage. 

Daily/Regular Care

• Dust & Debris: Use a microfiber cloth to remove dust.

• Spills: Wipe up spills immediately to prevent them from soaking in. 

Occasional Cleaning (Weekly/As Needed) 

• Dilute: Add a capful of Osmo Wash & Care to a liter of water.

• Wipe: Use a damp (not soaking wet) cloth with the solution.

• Dry: Immediately dry the surface with a clean, dry cloth to prevent water from entering joints.

• Avoid: Do not use steam cleaners or general household cleaners with bleach, ammonia, or chlorine, as they can strip the finish. 

Refreshing Worn Areas (Every Few Months/Years) 

• For tired spots: Use Osmo Liquid Wax Cleaner.

• Application: Apply a small amount to a lint-free cloth, rub into the area, let it haze, and buff when dry. (Use Osmo Liquid Wax Cleaner White for Osmo Oil RAW to maintain color). 

Repairing Scratches/Deep Wear

• Light Sanding: Lightly sand the affected area with fine sandpaper (e.g., 150-grit).

• Clean: Remove dust and clean with denatured alcohol (allow to fully evaporate).

• Re-apply Oil: Apply a very thin, feathered coat of Polyx-Oil or Osmo Maintenance Oil (a thinner version).

• Wipe Excess: Wipe off any excess oil and let it dry thoroughly.